One perk of having your home security installed by professionals is that you hardly ever need to worry about it. However, there may be times when you must reset your alarms in Elizabethtown. If you use the ADT Command interface, a reset typically needs only one or two tap of a button after a false alarm, power outage, or battery change.
Read The Owner’s Manual Before Trying to Reset Your Alarm Panel
Here’s a simple yet valuable tip before you try to reset your Elizabethtown home security system, consult your instruction manual ahead of time. You’ll never want to damage your system due to pressing a button in error. In addition, your system might change if you switched from a numerical keypad to a modernized touchscreen interface. And if you can't reset your system, don't worry as you can always reach out to your trusted security specialists.
Resetting Your Elizabethtown Security System Because Of A False Alarm
Typically, a false alarm occurs as a result of the accidental tripping of a sensor. You are able to engage the central hub or open your ADT security app and touch the shield option and submit your unique passcode to turn off the system when this occurs. You may receive notification from your security monitoring team, but just let them know it was a false alarm.
Resetting Your Alarm Following A Power Outage In Elizabethtown
If the power goes out because of lighting, strong winds, or other reasons, you might start to hear a beeping sound from your control panel. This signifies that your home’s defense is being powered by the secondary power source. To reset the alarm and stop the constant chirping, you must deactivate and reactivate your system.
Keep in mind, if you lose power for an extended time, you could need a total system reset. Pay careful attention to the instructions in your user’s handbook -- usually by putting in your PIN number and tapping the off button twice -- and you should be back in business. You could still hear chirping caused by the secondary power source, as it’s possible it won’t end until the battery charges entirely. Reach out to your security technician if you are still having difficulties with your ADT system 20 hours after the power is resumed.
Reset Your Home Security System After Switching Out A Battery
Occasionally you need to replace a battery within one of your home security components. In order to accomplish this, you will change your system to test mode so you don't trigger an alarm by accident. Once the new battery is put in place, remove the alarm from "Test Mode" and restore your usual settings. If the control panel doesn't register the piece of equipment or the battery indicator is still on, you may need a full reset of your security system.
Resetting Your Elizabethtown Security System After Adding Or Deleting A Code
Removing or adding people can be completed on your ADT Command interface and your ADT smartphone app. You won’t have to perform a system reset after adding or removing a user or code. With that being said, if you find yourself moving to a new house that already has an ADT system, you need to reach out to your home security professional at (270) 262-4315 to establish a new plan. The installer will go on site to replace components, install additional alarms or cameras (if necessary), and reset the system for you.
A Well-Designed Security System Is Only A Call Away
Attempting to reset a home security system in Elizabethtown is difficult if it doesn’t have user-friendly instructions and features. If you would like to find your functional and powerful home protection system, contact (270) 262-4315 or send in the form below. Our team is pleased to design the right security system for your property.